Surge Protectors Dealers in Ernakulam Lightning Surge Suppressors


Surge Protectors Dealers in Ernakulam
Lightning Surge Suppressors
Various types of surge voltages occur in electrical plants and electronic systems. Depending on the cause, the duration and amplitude of each surge can vary greatly. The direct or indirect consequences of lightning strikes are one particular cause of surge voltages. Here, during the surge voltage, high surge currents with amplitudes of up to ten thousand amperes can occur. In this case, largescale equipment failures and data loss can occur. This failure is often not covered by insurance and, within a short period of time, can become a heavy financial burden – especially in comparison to the cost of installing a Surge Protection Device (SPD).
Protect against the causes of surge voltage
Lightning strikes
Switching electromagnetic pulse (SEMP)
Electrostatic discharges (ESD)








CAT5/6/7 Data Line Lightening Surge Protector
Protective Adapter to be inserted into the Data Line for the Protection of LAN interfaces and The RJ45 Cable: Reliable data is indispensable in today's industry. The sensitive systems used in LANs work with high frequencies at low signal levels and are networked over a wide area. Surge voltages can quickly lead to largescale failures and, in the worst-case scenario, data loss. Data Line Surge protectors are specifically designed to protect your investment in expensive wired, wireless and PoE equipment.

PHOTOVOLTAIC SURGE PROTECTOR
If you need effective Lightning, RFI, ESD and transient surge protection for highspeed data transmission, the DT-LAN-CAT.6+ offers universal protection without affecting the signal at network speeds of up to 10 Gbps
surge protectors Type 1 + 2
Type 1 + 2 surge protectors are installed at the head of the installations to be protected and they combine the characteristics of Type 1 and Type 2.  Type 1 + 2 surge protectors are modular devices, which are installed in the head of the installation, which protect it by combining the properties of Type 1 and Type 2.
The internal protection is necessary in a lightning protection installation to avoid that in the event of lightning striking the electrical network, affect the protected building.
Data Lines Protector
Surge arresters for data lines protect the electronic equipment that forms the communication network from any type of transient surge induced on the data lines. These protectors should be installed as close as possible to the equipment to be protected.  surge arresters are modular devices that are installed as close as possible to the electronic equipment to be protected, and which protect the communications network from transient induced surges.
The internal protection is necessary in a lightning protection installation to avoid that in the event of lightning striking the electrical network, affect the protected building.

Surge Protectors Type 2
Surge protectors Type 2 are installed in the head of the electrical installations and in secondary power boards. They protect electronic and electrical equipment against transient surges of industrial, atmospheric and manoeuvring origin. Type 2 MD surge protectors are modular devices that are placed in power sub-frames or in electrical system headers.

The Type 2 surge protector is combined with Type 1 to ensure complete protection. The internal protection is necessary in a lightning protection installation to avoid that in the event of lightning striking the electrical network, affect the protected building.


Telecom and IT Networks Surge Protection Devices

Features:
Protection for data interfaces
Reliable transmission speeds up to 10 Gbps
Protective adapter for eight signal paths via RJ45 connector (including PoE+)
Suitable for category 6 high-speed data networks
Can be installed in a control cabinet by removing the ground connection adapter

Comments