ABB Surge Protection Devices Type 1+2 SPD Class I High discharge capacity
ABB Surge Protection Devices Type 1+2
SPD Class I
SPD Class I
High discharge capacity
OVR type 1 and type 1+2 are designed to discharge high current surges without any destruction of the installation. This surge protective device is characterized by its capacity to withstand impulse current with 10/350 µs waveform which simulates direct impact coming from a natural lightning current. Type 1 and Type 1+2 SPDs are placed at the entrance point of the installation, in the main distribution board for global protection of this installation.
Main benefits
Main benefits
The impulse current of 25kA per pole (10/350 µs wave) satisfies all requirements for overvoltage surge protection
The early creation of the electric arc by its electronic ignition device reduces the protection level Up to an optimum value of 2,5kV
OVR T1 SPDs contain a dedicated arc chamber for extinguishing the electrical arc following the discharge, they can open short circuits up to 50kA without using back up protection.
Main features
limp 25kA and 12.5kA
3 types of follow current (If) 50, 15 and 7kA
Spark gap and varistor technology
Global e-Solutions
http://cctvcamera.webnode.com
E-Mail : Global123@gmail.com
Comments
Post a Comment