Analog CCTV or IP Cameras, which one is correct for your need?
Analog CCTV or IP Cameras, which one is correct for
your need?
Today,
we see many CCTV designs proposed for buildings that are based on analog CCTV
solutions. Unlike some designers who still propose analog cameras, we can
undoubtedly confirm that the future of CCTV surveillance solutions is with
IP-based systems. Nevertheless, there are still rare cases where one might
decide to propose an analog camera – I’ll give a hint on those as well at the
end of this article.
In
this article, we want to quickly go over this topic and provide an
easy-to-understand explanation.
The key difference between analog CCTV and IP
Cameras
Without
going into too much of technical explanations, the two systems can be quickly
defined as below:
§
Analog cameras transfer the video
signals in analog form (electrical signals), usually use coaxial cables for the
cabling, and have the videos recorded by a DVR (Digital Video Recorder), where
each single camera is directly connected to the DVR.
§
IP cameras encode the video signal
into IP packets, use the data network (LAN) for the cabling, and have the videos
recorded by an NVR (Network Video Recorder) that can be connected anywhere on
the network.
Both
type of cameras use the same mechanism for capturing the video by their CCD
sensor, and the main difference is the method by which the video signal is
transmitted.
Benefits of IP Cameras over Analog CCTV
1.
Higher image
quality: Unlike a few years ago, where cameras
have poor video resolution, now we have mega-pixel IP cameras that totally
outmatch any analog camera solution. The higher pixel resolution of the IP cameras
means you can zoom into much more details of a scene even after it is recorded,
without losing clarity.
2.
Unified cabling
infrastructure: by utilizing the same LAN
network infrastructure, IP cameras can be deployed usually with no need for
major re-cabling. It also enables utilizing different network mediums such as
wireless and fiber links seamlessly.
3.
No major
interference / distortion hassle: in
analog systems, especially when the cameras are over a few hundred meters/feet
away from the DVR, interference and distortion due to electrical noises, poor
quality connections, and ground loop effects can cause tricky situations
requiring extensive effort to overcome. With IP cameras, one won’t need to
bother about interferences / image quality issues.
4.
Power arrangements: IP cameras can be mostly powered over the
same network cable through POE (Power Over Ethernet) by simply connecting them
to a POE-capable network switch, eliminating the need for separate source of
power. This is not the case in analog cameras, where each camera would need
separate power source.
5.
Easy management: IP cameras can be easily managed and
controlled remotely. This considerably simplifies and speeds up troubleshooting
of the system. One can easily check the connectivity of each individual camera
over the network using a laptop with proper authentication, while in analog
cameras physical attendance to each camera and using of separate monitoring
tools is a must.
6.
Lots of extra
features: New IP cameras come with a
constantly-expanding list of new features and enhancements – these include
video analytic and enhancement features, web interface for direct view and
remote monitoring and control, automatic alert notifications via email and SMS
and even internal NVR for recording of videos.
When can We still consider Analog Cameras?
With
all technology enhancements, many of the arguments justifying analog cameras
are not valid anymore and belong to the past. Arguments such as analog cameras
have better image quality or costs less were valid a couple of years ago, but
not anymore.
But
there are two design conditions when one might still justify an analog camera
solution:
1.
Very small systems
for small shops: If you want a very
simple and cost effective setup to include up to 4 cameras connected with a
very short cables to a DVR to setup a basic surveillance for a small shop,
analog cameras are probably still considerable for 1-2 more years.
2.
Distributed,
distant cameras with no existing network infrastructure: There might be some rare cases where a simple
surveillance solution is needed where there are a few cameras distributed in
different directions and with several hundred meters/feet distance from the
control room. In such cases, if there is no network infrastructure available,
one might still consider an analog camera solution for the sake of lower costs
of implementation.
Conclusion: After
reading this article, if you see a designer proposing you a camera system based
on “coaxial cables” – you can confidently conclude that you are in wrong hands!
If
you have any questions or suggestions, please feel free to contact us using the
form below.
Naryanan Santhosh Kumar
Global e Solutions
9846179999, 9846970489, 9961602200
Write to us Global123@gmail.com
These information shared for knowledge purpose only. For further
Reference search in Internet.
TAHNK YOU U for so informative blog vist us for CCTV bus solutions in dubai
ReplyDelete